+7 (495) 225-98-16
125080, г. Москва,
Волоколамское ш.1, стр.1
info@corson.ru

Вход для партнеров

Продукция

Производители

Модули нормализации сигналов и клеммные платы

Компания Corson предлагает наиболее экономически выгодные, конфигурируемые, изолированные модули нормализации сигналов из представленных сегодня на рынке.

The ADAM-3011 is field-configurable, isolation-base, thermocouple input signal conditioner. ADAM-3011 uses microprocessor-controlled high-resolution 16-bit dual-slope, integrating A/D converter to acquire thermocouple signal and cold junction compensation input.

ADAM-3013 is a DIN-rail mounted, RTD input signal conditioning module with 1000 VDC 3-way isolation between input, output and power. The switch configurable input and output offers flexible, wide ranging capability for Platinum and Nichel RTDs. The input of the ADAM-3013 RTD input can be configured for any one of up to fourteen defined temperature ranges and two OEM-defined ranges. The output is linearized to the RTD temperature input and can be set for either 0~5 V, 0~10 V or 0~20 mA.

The ADAM-3014 is one of the most cost-effective, field-configurable, isolation-based signal conditioners available for protecting processed signals from harm-ful effects of ground loop, motor noise, and other electrical interference. The ADAM-3014 features a new optical isolation technique to provide 1000 VDC isolation with low power consumption and extreme accuracy and stability within a wide range of operating environments.

ADAM-3016 is a DIN rail-mounted strain gauge input signal conditioning module with 1000 V DC 3-way isolation between input, output and power. The switch con-figurable input and output offers flexible, wide ranging capability for strain gauge. ADAM-3016 is equipped with a power LED to monitor the line power and a DC-to-DC converter status and 3 VR (ZERO, SPAN, EXCI) to calibrate input/output range and excitation voltage.

The ADAM-3112 is an isolated AC voltage input signal conditioner. It supports three different AV voltage input modes (120V, 250V and 400V) and transduces them into 0~5VDC output.

The ADAM-3114 is an isolated AC current input signal conditioner. It transduces 0~5A current into 0~5VDC output for users to measure.

The ADAM-3854 features four industrial SPDT (Form C) electromechanical power relays and a DIN-rail mount. Each of the relays is controlled by a +24 VDC digital signal and is equipped with an adjacent LED to display its status. Each output is equipped with a varistor that shunts the surge voltage of an inductive load or electromagnetic brake to protect the relay contact points. All the relay outputs and relay controls are accessible through wiring terminals, allowing the ADAM-3854 to be easily connected to any item of equipment or device such as programmable logic controllers (PLCs).

The ADAM-3864 is a solid state digital I/O module carrier backplane that accommodates any combination of up to four high-performance, low-cost photocoupler-isolated solid state digital I/O modules. This backplane can accept either 24 VDC or 5 VDC I/O modules, depending on the type of power supply.

100-pin DIN-rail SCSI Wiring Board To Be Used With PCI-1240U, PCI-1245, PCI-1245E, PCI-1265, PCI-1285E

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3951 is a SCSI-II 50-pin wiring terminal module with LED indicators for DIN-rail mounting. This terminal module can be readily connected to the Advantech PC-Lab cards and allow easy yet reliable access to individual pin connections for the PCI-1752/1754/1756 card.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.

The PCLD-7216 is an SSR I/O module carrier board that holds any combination of up to 16 SSR I/O modules. Each channel is equipped with two screw terminals for field connections. The PCLD- 7216 can be connected to the PCL-722, PCL-724 or PCL-731 via its Opto-22 compatible 50-pin edge connector.