SSR I/O module carrier board that can accept up to eight photo-coupler isolated solid state relay modules and drive up to eight external relays. LED status indicators.
16/24 SPDT electromechanical relays with a 20-pin flat cable connector and an additional 50-pin Opto-22 connector (for PCLD-785B only). LED status indicators.
16/24 SPDT electromechanical relays with a 20-pin flat cable connector and an additional 50-pin Opto-22 connector (for PCLD-785B only) compatible. LED status indicators.
Compatible with all PC-LabCard™ products with DI channels on either 20-pin flat cable or 50-pin Opto-22 compatible connectors. 24 optically-isolated digital input channels.
Compatible with all PC-LabCard products with DI channels. See specifications for details. 16 or 24 optically-isolated digital input channels. LEDs indicate input logic status.
Universal screw-terminal boards provide convenient and reliable signal wiring for PC-LabCard™ products with 20-pin flat-cable connectors. Pin to pin design.
SSR I/O module carrier board that holds any combination of up to 16 SSR I/O modules. Connected to the PCL-722, PCL-724 or PCL-731 via its Opto-22 compatible 50-pin edge connector.
DIN-rail mounting terminal for industrial applications with 68-pin SCSI-II female connector. Converts one 68-pin SCSI connector to three 20-pin connectors.
DIN-rail mounting screw terminal module for industrial applications with 68-pin SCSI female connector. Case dimensions (W x L x H): 77.5 x 191.2 x 51 mm (3.1" x 8.4" x 2.0").
Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB62 female connector. Case dimensions (W x L x H): 77.5 x 124.5 x 63.5 mm (3.1" x 4.9" x 2.5").
Low-cost DIN-rail mounting wiring terminal module for PCI-1752/1754/1756 with 50-pin SCSI female connector. To Be Used With PCI-1752U, PCI-1754, PCI-1756.
Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with 50-pin flat cable connector. Case dimensions (W x L x H): 77.5 x 146.3 x 51 mm (3.1" x 5.8" x 2.0")
Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB37 female connector. Case dimensions (W x L x H): 87.2 x 112.5 x 51 mm (3.4" x 4.4" x 2.0").
Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with 20-pin connector. Case dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.1" x 2.7" x 2.0").
Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector. Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1" x 1.8" x 2.0").
This backplane can accept either 24 VDC or 5 VDC I/O modules, depending on the type of power supply. 2,500 VRMS optical isolation. LED status indicators. DIN-rail mounting
AC voltage input signal conditioner. It supports three different AV voltage input modes (120V, 250V and 400V) and transduces them into 0~5VDC output. Input impendent: 2 M.
DIN rail-mounted strain gauge input signal conditioning module with 1000 V DC 3-way isolation between input, output and power. Switch configurable mV or V input of full bridge.
Flexible DIN-rail mounting. Easy input/output range configuration. 1000 V DC , fully isolated. Operates from single +24 VDC. Low power consumption, 0.85 W (Voltage Output).
DIN-rail mounted, RTD input signal conditioning module with 1000 VDC 3-way isolation between input, output and power. Switch configurable for 0~5 V, 0~10 V or 0~20 mA outputs.
Компания Corson предлагает наиболее экономически выгодные, конфигурируемые, изолированные модули нормализации сигналов из представленных сегодня на рынке.
