ISA-compatible with PCL-730. 32-ch TTL DI/O (16-ch digital input,16-ch digital output). 2 x 20-pin connectors for isolated DI/O channels. 2 x 20-pin connectors for TTL DI/O channels.
24-channel digital I/O low profile PCI card that meets the PCI standard REV.2.2 (universal PCI expansion card). Works with 3.3 V and 5 V PCI slots. Convenient DB25 connector.
Up to 192 (96 + 96) TTL digital I/O lines. Emulates mode 0 of 8255 PPI. The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1, B1, C1, A2, B2,C2, A3, B3 and C3.
96-bit digital I/O card for the PCI bus, which can be extended to 192 digital I/O channels by connecting its extension board - PCI-1753E. The card emulates mode 0 of the 8255 PPI chip
48-bit digital I/O card for the PCI bus. Its 48 bits are divided into six 8-bit I/O ports and users can configure each port as input or output via software. BoardID switch
12 14-bit analog output channels, and is pin-complatible with the ISA PCL-727 card for easy migration. It supports both +/-10 V and 0 ~ 20 mA current loop (sink). BoardID™ switch
Auto calibration function. A 16-bit DAC is equipped for each analog output channel. 2-port (16-channel) user-defined digital input/output. BoardID™ switch
10 MHz maximum digital update rate. 16-ch DI/O and one 10 MHz 16-bit resolution counter. BoardID™ switch. 4 analog output channels with 1,024 samples FIFO buffer
4 12-bit D/A output channels. 2,500 VDC isolation between the outputs and the PCI bus. Multiple output ranges. Universal PCI and BoardID™ switch. 1 DB37 connector for easy wiring
64-ch single-ended or 32-ch differential or a combination of analog input. 16-bit A/D converter, with up to 250 kHz sampling rate. Universal PCI Bus (support 3.3 V or 5 V PCI bus signal)
32-ch single-ended or 16-ch differential or a combination of analog input. 2,500 VDC isolation protection. 12-bit resolution for A/D conversion. Universal PCI bus
