Модули нормализации сигналов и клеммные платы

Flexible DIN-rail mounting. Configurable thermocouple type. 1000 VDC, fully isolated. Operates from a single +24VDC. Temperature range of 0 to 50°C.

DIN-rail mounted, RTD input signal conditioning module with 1000 VDC 3-way isolation between input, output and power. Switch configurable for 0~5 V, 0~10 V or 0~20 mA outputs.

Flexible DIN-rail mounting. Easy input/output range configuration. 1000 V DC , fully isolated. Operates from single +24 VDC. Low power consumption, 0.85 W (Voltage Output).

DIN rail-mounted strain gauge input signal conditioning module with 1000 V DC 3-way isolation between input, output and power. Switch configurable mV or V input of full bridge.

AC voltage input signal conditioner. It supports three different AV voltage input modes (120V, 250V and 400V) and transduces them into 0~5VDC output. Input impendent: 2 M.

The ADAM-3114 is an isolated AC current input signal conditioner. It transduces 0~5A current into 0~5VDC output for users to measure.

4 single-pole double-throw (SPDT) relays. High power relays can handle up to 5 A @ 250 VAC and 5 A @ 30 VDC. LED status indicators. DIN-rail mounting.

This backplane can accept either 24 VDC or 5 VDC I/O modules, depending on the type of power supply. 2,500 VRMS optical isolation. LED status indicators. DIN-rail mounting

100-pin DIN-rail SCSI Wiring Board To Be Used With PCI-1240U, PCI-1245, PCI-1245E, PCI-1265, PCI-1285E

Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector. Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1" x 1.8" x 2.0").

Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with 20-pin connector. Case dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.1" x 2.7" x 2.0").

Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with DB25 connector. To Be Used With PCI-1757UP, PCL-833.

Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB37 female connector. Case dimensions (W x L x H): 87.2 x 112.5 x 51 mm (3.4" x 4.4" x 2.0").

Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with 50-pin flat cable connector. Case dimensions (W x L x H): 77.5 x 146.3 x 51 mm (3.1" x 5.8" x 2.0")

Low-cost DIN-rail mounting wiring terminal module for PCI-1752/1754/1756 with 50-pin SCSI female connector. To Be Used With PCI-1752U, PCI-1754, PCI-1756.

Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB62 female connector. Case dimensions (W x L x H): 77.5 x 124.5 x 63.5 mm (3.1" x 4.9" x 2.5").

DIN-rail mounting screw terminal module for industrial applications with 68-pin SCSI female connector. Case dimensions (W x L x H): 77.5 x 191.2 x 51 mm (3.1" x 8.4" x 2.0").

DIN-rail mounting terminal for industrial applications with 68-pin SCSI-II female connector. Converts one 68-pin SCSI connector to three 20-pin connectors.

DIN-rail mounting terminal for industrial applications with 68-pin SCSI-II female connector. Converts one 68-pin SCSI-II connector to 50-pin Opto-22 compatible box headers.

SSR I/O module carrier board that holds any combination of up to 16 SSR I/O modules. Connected to the PCL-722, PCL-724 or PCL-731 via its Opto-22 compatible 50-pin edge connector.