+7 (495) 225-98-16
125080, г. Москва,
Волоколамское ш.1, стр.1
info@corson.ru

Вход для партнеров

Коммуникационные платы

PCIe-PoE334LP – это серверная низкопрофильная плата, объединяющая 4-портовый серверный контроллер GigE и 802.3at PoE, и имеющая 3 класс защиты от перенапряжения (IEC 6100-4-5).

PCL-711 offers four of the most popular I/O functions for PC/AT and compatible systems: A/D conversion, D/A conversion, digital input and digital output. The inexpensive PCL-711 is ideal for entry level applications. The features of this half-sized card include: eight 12-bit analog inputs, one 12-bit analog output, 16 digital inputs and 16 digital outputs. In addition, it comes with a 20-point screw-terminal board and a flat cable connector. PCL-711 performs a variety of I/O jobs, and features solid software support and a large selection of available daughterboards and accessories. It is an ideal and affordable performer for OEMs, schools and hobbyists who require a combination of analog and digital I/O.

The PCL-711Sis a fully-integrated package that offers four of the most popular I/O functions for PC/AT and compatible systems: A/D conversion, D/A conversion, digital input and digital output. The inexpensive PCL-711Sis ideal for entry level applications. The features of this half-sized card include: eight 12-bit analog inputs, one 12-bit analog output, 16 digital inputs and 16 digital outputs. In addition, it comes with a 20-point screw-terminal board and a flat cable connector.

PCL-812PG is a multifunction analog and digital I/O card that features the five most desired measurement and control functions for PC/AT and compatible systems: A/D conversion, D/A conversion, digital input, digital output and vounter/timer. This half-size card neatly packages 16 12-bit analog input channels, two 12-bit analog output channels, 16 digital input channels, 16 digital output channels and a programmable counter/timer.<br>In addition to all the features listed above, PCL-812PG offers the convenience of programmable analog input ranges, where the analog input range can be switched by software commands instead of DIP switches. PCL-812PG also delivers convenience and maximum resolution for applications that need different gains for different channels or different gains for different stages of a process. Comprehensive software support, numerous I/O options and a wide range of available daughterboards make the PCL-812PG ideal for industrial applications that require a combination of analog and digital I/O.

The PCL-818L series was designed for entry-level models to the PCL-818 series. The cards have been designed with the cost-sensitive customer in mind, but still offers the same functions as the rest of the series, except that they have a 40 kHz sampling rate and only accepts bipolar inputs. They are fully software and connector compatible with the PCL-818HD and PCL-818HG. This lets you upgrade your applications to these higher performance cards without hardware or software changes. The PCL-818LS bundle consists of the PCL-818L card, the PCLD-8115 wiring terminal board and a DB37 cable assembly. The PCLD-8115 accommodates onboard passive signal conditioning components (resistors and capacitors), allowing you to easily implement a low-pass filter, a voltage attenuator or a 4 ~ 20 mA voltage converter.

The PCL-818L series was designed for entry-level models to the PCL-818 series. The cards have been designed with the cost-sensitive customer in mind, but still offers the same functions as the rest of the series, except that they have a 40 kHz sampling rate and only accepts bipolar inputs. They are fully software and connector compatible with the PCL-818HD and PCL-818HG. This lets you upgrade your applications to these higher performance cards without hardware or software changes.<br>The PCL-818LS bundle consists of the PCL-818L card, the PCLD-8115 wiring terminal board and a DB37 cable assembly. The PCLD-8115 accommodates onboard passive signal conditioning components (resistors and capacitors), allowing you to easily implement a low-pass filter, a voltage attenuator or a 4 ~ 20 mA voltage converter.

The PCL-818L series was designed for entry-level models to the PCL-818 series. The cards have been designed with the cost-sensitive customer in mind, but still offers the same functions as the rest of the series, except that they have a 40 kHz sampling rate and only accepts bipolar inputs. They are fully software and connector compatible with the PCL-818HD and PCL-818HG. This lets you upgrade your applications to these higher performance cards without hardware or software changes. The PCL-818LS bundle consists of the PCL-818L card, the PCLD-8115 wiring terminal board and a DB37 cable assembly. The PCLD-8115 accommodates onboard passive signal conditioning components (resistors and capacitors), allowing you to easily implement a low-pass filter, a voltage attenuator or a 4 ~ 20 mA voltage converter.

The PCL-818L is the entry-level model in the PCL-818 series. We designed it with the cost-sensitive customer in mind. In addition to that it has a 40 kHz sampling rate and only accepts bipolar inputs, this cards offers same functions as the rest of PCL-818 series: 12-bit A/D conversion, D/A conversion, digital input, digital output and counter/timer.

PCL-813B is a 12-bit 32-channel analog input card that offers high-voltage isolation on each analog input. It is an extremely cost effective solution for applications in industrial easurement and monitoring. The card offers 32 analog input channels with software programmable gain on each channel and two DC-to-DC converters on a 4-layer PCB with an integral ground plane. Optically-isolated inputs provide over 500 VDC of isolation between the analog inputs and the PC, protecting the PC and peripherals from damage due to high voltages on the input lines. PCL-813B is ideal for situations where the budget-conscious user requires flexibility, stability and a high level of isolation protection. PCL-813B comes with the PCLD-881 wiring terminal board and a DB-37 cable assembly.

PCL-726, and PCL-728 are analog output cards with 12-bit analog output channels. You can individually confi gure each channel to any of the following ranges: 0 to +5 V, 0 to +10V, ±5 V, ±10 V and 4 to 20 mA current loop(sink). Designed for use in industrial environments, these cards are ideal,economical solutions for applications that require multiple analog outputs or current loops.

PCI-1727U provides twelve 14-bit analog output channels, and is pin-complatible with the ISA PCL-727 card for easy migration. It supports both +/-10 V and 0 ~ 20 mA current loop (sink). The card's on board DC-to-DC converter ensures the full 10 V D/A output is always available.<br>Each analog output channel has a built-in fuse to protect the circuit, PC and the external devices. PCI-1727U is an ideal, economical solution for the applications which require multiple PID control loops. In addition to its analog outputs, PCI-1727U provides 16 TTL DI and 16 TTL DO channels that are easily applied with industrial on/off control applications.

PCL-726, and PCL-728 are analog output cards with 12-bit analog output channels. You can individually confi gure each channel to any of the following ranges: 0 to +5 V, 0 to +10V, ±5 V, ±10 V and 4 to 20 mA current loop(sink). Designed for use in industrial environments, these cards are ideal,economical solutions for applications that require multiple analog outputs or current loops.

The PCL-720+ digital I/O and counter card is PC-compatible add-on cards with 32 digital input channels, 32 digital output channels and three programmable counter/timer channels. Their digital I/O channels are TTL-compatible and use 74LS244 driver/ buffer circuits to provide high output driving capacity. These buffered circuits also require lower input loading current than regular TTL circuits. The cards' 8254 programmable counter/timer provides three fl exible 16-bit counter/timer channels. You can generate waves and pulses by programming the 8254. Jumper settings determine the clock crystal frequency. The cards also includes a breadboard area perfect for customized circuits.

144-ch Digital I/O ISA Card

24 TTL digital I/O channels; Emulates mode 0 of 8255 PPI; Interrupt handling; Opto-22 compatible 50-pin connectors; Output status readback;

48 TTL digital I/O channels; Emulates mode 0 of 8255 PPI; Interrupt handling; Opto-22 compatible 50-pin connectors; Output status readback;

The PCL-725 relay actuator and isolated D/I card provides eight electromechanical SPDT relays and eight optically-isolated digital inputs on a half-size card. Its eight on-board SPDT relays are ideal for applications such as device On/Off control or low power switching. A red LED next to each relay shows its On/Off status for easy monitoring. The PCL-725’s eight optically-isolated D/I channels are ideal for digital input in noisy environments or with floating potentials. You can configure each input channel individually for either isolated or non-isolated input by setting jumpers. An on-board DB-37 connector provides access to all input and output channels.

The PCL-730 offers isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes them ideal for industrial applications where high-voltage isolation is required. There are also 32 TTL DIO channels.

The PCL-733 cards offer isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes it ideal for industrial applications where high-voltage isolation is required. In addition, all output channels are provide high-voltage protection.

The PCL-734 card offers 32 isolated digital output channels with isolation protection up to 2,500 VDC, which makes them ideal for industrial applications where high-voltage isolation is required.

ЗАКАЗАТЬ ЗВОНОК