Technology
|
Standard
|
IEEE 802.3 10Base-T Ethernet
|
|
IEEE 802.3u 100Base-TX Fast Ethernet
|
|
IEEE 802.3ab 1000Base-T Gigabitb Ethernet copper
|
|
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
|
|
IEEE 802.3x Flow Control and back-presure
|
|
IEEE 802.3ab 1000Base-T Gigabitb Ethernet copper
|
|
IEEE 802.1AB Link Layer Discovery Protocol(LLDP)
|
|
IEEE 802.1p Class of Service (CoS)
|
|
IEEE 802.1Q VLAN
|
|
ITU-T G.8032 Ethernet ring protection switching(ERPS)
|
|
IEEE 802.1D-2004 Rapid Spanning Tree Protocol(RSTP)
|
|
IEEE 1588Precision Time Protocol v1/v2
|
Interface
|
Ethernet Port
|
4 x 10/100/1000BaseT RJ-45, Auto-Negotiation
2 x 100/1000M SFP
|
System LED
|
2 x Power: Green On
1 x SYS: Ready: (Green On), Fireware Updating: (Green Blinking)
1 x DO: Red On
2 x Fiber: Link (Green On), Activity (Green Blinking)
1 x Ring: Off: Ring disabled, Green On: Ring normal (Not RPL Owner),Green Blinking: Ring normal (RPL Owner)
1 x Ra: Green On: Ring abnormal, Green Blinking: Ring port fail
|
Ethernet Port LED
|
Link (Green On), Activity (Green Blinking)
|
Rsest
|
System Reset(2-6 Seconds) / Default Settings Reset (over 7 Seconds)
|
USB
|
1 x USB for Configuration/Firmware Update
|
Power Input, Digital Output
|
6-Pin Removable Terminal Block Connector
4 Pin for Redundant Power
2 Pin for DO( Relay Alarm)
DO: Dry Relay Output with 0.5A /24V DC
|
Power Requirement
|
Input Voltage
|
24VDC(12~48VDC)
|
Reverse Polarity Protect
|
Yes
|
Input Current
|
0.3A@24V
|
Power Consumption
|
Max 7.2W@24VDC full loading, suggest to reserve 15% tolerance
|
Software
|
Management Interface
|
CGI WebGUI, Command Line Interface (CLI), Telnet, SNMP
|
Time Management
|
NTP, *IEEE 1588 Precision Time Protocol v1/v2
|
Network Management
|
IPv4, SNMP v1/v2/v3/Trap, MIBs, LLDP, DHCP server/client, TFTP, System Log, SMTP
|
Traffic Management
|
Flow Control, VLAN, Class of Service, QOS, Rate Control, Port Mirror
|
Security
|
Management IP, SSH, SSL
|
Redundancy
|
Rapid Spanning Tree Protocol (RSTP)
ITU-T G.8032 v1/v2 Ethernet Ring Protection Switching (ERPS)
|
Mechanical
|
Installation
|
DIN Rail
|
Enclosure Material
|
Steel Metal with Aluminum
|
Dimension
|
67.9(W) x 149(H) x 125(D) mm / without DIN Rail Clip
|
Ingress Protection
|
IP30
|
Weight
|
Around 765g without package
|
Environmental
|
Operating Temperature & Humidity
|
-40°C~70°C , 5%~95% Non-Condensing
|
Storage Temperature
|
-40°C~85°C
|
MTBF
|
>200,000 hours
|
Warranty
|
5 years
|
Approval
|
Safety
|
IEC60950-1 Compliance
|
EMC
|
EN61000-6-2/EN61000-6-4
|
EMI
|
CISPR 22, FCC part 15B Class A
|
EMS
|
EN61000-4-2 ESD: 8KV(Air), 6KV(Contact)
EN61000-4-3 RS: 20V/m(80M~1GHz), 10V/m(1.4G~2.1GHz), 5V/m(2.1G~2.5GHz)
EN61000-4-4 EFT: 2KV (Power, Signal Port, GND)
EN61000-4-5 Surge: Power 2KV/1KV(Line to Ground/Line to Line), Siganal Port: 2KV(Line to Ground)
EN61000-4-6 CS: 10 Vms(Power, Signal Port)
EN61000-4-8 Magnetic Field: 30A/m continues/300A for1~3s
|