Specifications
|
Technology
|
Standard
|
3GPP Release 11 Long Term Evolution (LTE), fallback 3GPP Release 7,8,9 for HSPA/UMTS
|
|
IEEE 802.11ac wireless local area network (WLAN), Backward support 802.11n/g/a/b Wireless LAN
|
|
IEEE 802.3 10Base-T Ethernet
|
|
IEEE 802.3u 100Base-TX Fast Ethernet
|
|
IEEE 802.3ab 1000Base-T Gigabit Ethernet copper
|
|
IEEE 802.3af/at Power-over-Ethernet
|
Interface
|
Ethernet Port
|
LAN: 8 x 10/100Base-TX RJ45, Auto Negotiation, IEEE 802.3af/at PoE/PoE+
WAN: 1 x 100/1000Base-T RJ45, Auto Negotiation
|
System LED
|
1 x DO: Red On
1 x Power: Green On
1 x SYS: Ready: Green On, Firmware Updating: Green Blinking
1 x WAN: Link: Green On, Activity: Green Blinking
1 x 1000M:WAM port speed, 1000M: Green On, Not 1000M: Off
3 x Radio (Ra, Rb, Rc): Radio status
Ra: SIM1 and 2 detected: Green On, SIM1 or 2 detected: Green Blinking, SIM 1 and 2 not inserted: Off
Rb: LTE1: 4G connection: Green On, 2/3G connection: Green blinking, Disconnected :Off
Rc: LTE2: 4G connection: Green On, 2/3G connection: Green blinking, Disconnected :Off
|
Ethernet Port LED
|
Link: Green On, Activity: Green Blinking, PoE power feeding: Amber on, PoE power not feeding: Off
|
Reset
|
System Reset(2~6 Seconds) / Default Settings Reset (over 7 Seconds)
|
SMA Connector
|
Up to 5: 4 xRP-SMA Female, 4 for Wi-Fi/LTE, 1 x GPS
|
SIM Socket
|
2 x Nano SIM tray: use 1 for each LTE module
*Optional 1 x ESIM redundancy for 1 LTE moudule
|
Power Input, Digital Output
|
4-Pin Removable Terminal Block Connector
2 Pin for Power Input
2 Pin for DO (Relay Alarm)
DO: Dry Relay Output with 0.5A /24V DC
|
Optional Expansion Board
|
RS232/422/485, Digital Input/ Digital Output, MicroSD card for field application, by request
|
Cellular Properties
|
Standard
|
GSM/GPRS/EDGE 3GPP Pelease 6
UMTS/HSPA 3GPP Release 8
LTE 3GPP Release 11
|
Data Rate
|
GPRS: DL: max. 85.6 kbps, UL: max.85.6 kbps
EDGE: DL: max. 236.8 kbps, UL: max. 236.8 kbps
HSPA: DL: max. 42 Mbps, UL: max. 5.76 Mbps
LTE-FDD Cat.4: DL: max. 150 Mbps, UL: max. 50 Mbps, 2x2 DL MIMO
LTE-TDD Cat.4: DL: max. 130 Mbps, UL: max. 35 Mbps, 2x2 DL MIMO
|
Band Information: LTE-E
|
LTE: FDD B1/B3/B5/B7/B8/B20 (2100/1800/850/2600/900/800MHz)
LTE: TDD B38/B40/B41 (2600/2300/2500MHz)
WCDMA: FDD B1/B5/B8 (2100/850/900MHz)
GSM: B3/B8 (1800/900MHz)
|
Band Information: LTE-U
|
FDD LTE: B2/B4/B12 (1900/1700/700MHz)
WCDMA: B2/B4/B5 (1900/1700/850MHz)
|
Band Information: LTE-CN
|
LTE FDD: B1/B3/B5/B8 (2100/1800/850/900MHz)
LTE TDD: B38/B39/B40/B41 (2600/1900/2300/2500MHz)
TD-SCDMA: B34/B39 (2000/1900MHz)
WCDMA: B1/B8 (2100/900MHz)
CDMA: BC0
GSM: 900/1800MHz
|
Wi-Fi Properties
|
Standard
|
IEEE 802.11ac/a/b/g/n (2T2R)
802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM)
|
Data Rate
|
802.11ac: MCS0~9, max. 866Mbps
802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: MCS0~15, max.300Mbps
|
Frequency
|
IISM Band, 2.412GHz~2.472GHz, 5.180MHz~5.825MHz(Band 1,4)
|
MIMO
|
2T2R, 2xAntennas
|
RSSI
|
≦20db, compliant with CE request
|
Output Power & Receive Sensitivity
|
Operating Frequency: 2.412~2.472GHz
Operating Frequency: 5.180G~5.825GHz
Max. MIMO: 2T2R
|
GPS Properties
|
GNSS
|
GPS/GLONASS/BeiDou/Galileo
|
Performance
|
Cold start: 18s, Warm start: 2.2s, Hot start: 1.8s
|
Sensitivity
|
Cold start: -146dBm, Reacquisition: -157dBm, Tracking: -157dBm
|
Accuracy
|
< 1.5M
|
GNSS Frequency
|
GPS/Galileo: 1575.42±1.023 MHz
GLONASS: 1597.5~1605.8 MHz
BeiDou: 1561.098±2.046 MHz
|
Antenna
|
Frequency range: 1561~1615MHz
Polarization: RHCP or linear
VSWR: <2 (Typ.)
Passive antenna gain: >0dBi
|
Software
|
Management Interface
|
CGI WebGUI, Command Line Interface (CLI), Telnet, SNMP
|
Network Time Managemant
|
SNTP, Cellular Time
|
Network Management
|
IPv4/IPv6, DDNS, SNMP v1/v2c/v3/Trap, MIBs, LLDP, DHCP server/client, TFTP, System Log
|
Traffic Management
|
NAT Routing, Traffic Control
|
Security
|
Firewall, DMZ, Port Forwarding, HTTPs, SSH
|
Redundancy Protocol
|
WAN/LTE Redundancy
|
VPN
|
IPsec, OpenVPN
|
Cellular Configuration
|
Radio on/off, 4G LTE/3G HSPA Configuration, SIM Security, Connection Status, Cellular to Eth-WAN Redundancy, GPS positioning
|
WLAN Configuration
|
WLAN Basic Settings: Radio on/off, 2.4G 11n/5G 11ac Band and Frequency selection, SSID/Multi-SSIDconfiguration, SSID broadcast, VLAN ID, WLAN to LAN Link fault pass-through, Cellular to WLAN Auto Offload and advanced WLAN settings, 802.1X
|
Power Requirement
|
Input Voltage
|
12/24VDC(8~32VDC)
|
Reverse Polarity Protect
|
Yes
|
Input Current
|
0.5A@24VDC
|
Power Consumption
|
Max 12W@24VDC full traffic without PD loading, suggest to reserve 15% tolerance
|
PoE
|
Power forwarding mode
|
Alternative A
|
PoE Power Budget
|
System: Max. 120W@70°C/24VDC, Max.60W@70°C/8VDC
|
PoE Standard
|
IEEE 802.3af/at
|
Management
|
PoE Enable/Disable, System/Port Power Budget Control, PD Alive Check, PoE Scheduling, PoE Status
|
Mechanical
|
Installation
|
Wall mount
|
Enclosure Material
|
Steel Metal with Aluminum
|
Dimension
|
200(W) x 51(H) x 126(D) mm / without Mounting Clip
|
Ingress Protection
|
IP31
|
Weight
|
≒1.4KG (TBD)
|
Environmental
|
Operating Temperature & Humidity
|
-40°C~75°C , 5%~95% Non-Condensing
|
Storage Temperature
|
-40°C~85°C
|
MTBF
|
>200,000 hours
|
Warranty
|
5 years
|
Approval
|
Safety
|
EN60950-1 Compliance
|
EMC
|
EN61000-6-2/EN61000-6-4
|
EMI
|
CISPR 22, FCC part 15B Class A
|
Radio
|
RED Compliance
Safety: EN 62368-1
EN 50385/EN62311 MPE assessment
EN 301 489-1/17/19/52, EN 55032/55024
EN 300 328/EN 301 893
EN 301 908-1
FCC Part 15B
|
Traffic Control
|
NEMA-TS2 Compliance
|
Railway
|
EN50121-4 Compliance
|